This is for the Frontier Fort with Swings Kit. This kit does not include the slide. Please see our slides.

 Kit Includes:

• Fort hardware (hot-dipped galvanized)
• Swingbeam A-frame bracket and hardware (hot-dipped galvanized)
• Thirteen ladder brackets with hardware
• Two swingbelts with plastisol coated chains (yel, blu, or grn)
• One trapeze bar with plastisol coated bar (yel, blu, or grn)
• Six swing-hangers and spring clips
• Two removable marine grade vinyl tarps (grn or blu)
• Four safety handles
• Step-by-step 3D illustrated manual

*Lumber Not Inlcuded

Specifications:

The Frontier is the newest addition to the Plan-it Play family of kits. This massive playset features two levels, one at 5 feet and the upper at 7 feet. The lower deck is 4ft. x 6ft. wide and the upper is 6ft. x 6ft. wide with 7ft. of head clearance. The playset is easy to modify and fit almost any slide combination. All of which are available through Plan-it Play.

Our patented two-piece swingbeam bracketing system makes installation quick and easy. The bracket, made from 7 gauge high-tensile steel, is unsurpassed in strength and like all hardware components carries a one year warranty.

The swings and trapeze bar are rated as 'high-end residential' and should last years in your backyard playground. The plastisol coated bars and chains make for soft easy gripping and won't pinch fingers or tangle hair.

This solid structure is supported by six 4x4's - cement, ground anchors and braces are not needed. The deck boards are 2x6 lumber and can easily support the weight of several adults.

Like all Plan-it Play kits the entry ladder is inclined 30 degrees and made from 4x4 and 2x6 lumber, never 2x4's, dowels or 1" lumber.

Bonus features include:
Wide entry area from the lower level to upper level, almost 6 feet!
Two pairs (four) of extra-long safety handles with molded finger grips.
Instructions for adding a picnic table and benches.
Instructions for building with or without slides.
Compatible with all Plan-it Play add-on kits (rockwall, monkey bars, etc.)

Required Tools

• Circular saw
  
• Electric drill w/ philips head bit
  
• 1 ¼" spade bit
  
• 7/16" standard drill bit
  
• 5/8" standard drill bit (6'x 6' forts)
  
• Socket wrench w/ 9/16" deep socket
  
• Hammer
  
• Vise grips
  
• Tape measure
  
• Combination square
  
• Extension cord
  
• Pencil
  
• Level

Safety, Finishing and Optional Tools

• Electric impact wrench w/ 9/16" deep socket
  
• Hand sander
  
• Router w/ round over bit
  
• Stain/waterproof sealer
  
• Saw horses
  
• Safety glasses
  
• Work gloves
  
• Dust Mask

Frontier Swing Set Lumber Purchase Sheet

Size	Without Slides	With Slide on Lower Deck	With Slide on Upper Deck	Total
4 x 4 x 12	7	no change	no change	7
4 x 4 x 10	4	no change	+ 1	4-5
4 x 4 x 8	2	no change	no change	2
2 x 6 x 12	11	no change	no change	11
2 x 6 x 10	2	no change	no change	2
2 x 6 x 8	7	no change	+ 1	7-8
2 x 4 x 12	9	no change	no change	9
5/4 x 6 x 8	11	- 1	- 1	9-11

Swing Beam Requirement

4 x 6 x 12	1
4 x 6 x 8	1
4 x 4 x 10	2
2 x 4 x 8	1